User's Manual

PRESET
THE PRESET MENU
In order to simplify the set up of the Ego11 a number
of preset configurations are available for selection.
Choosing one of these presets will cause all of the
necessary parameters to be set in such a way as to
make the Ego11 comply with the rules governing a
particular paintball league.
1
It is also possible for the user to save up to two preset
configurations of their own.
LOAD
THE LOAD PRESET PARAMETER
This parameter is used to load the
required preset configuration and has
the following choices:
> USER 1: Load a set of custom firing mode
parameters that have been previously saved
by the user.
> USER 2: Load a set of custom firing mode
parameters that have been previously saved by the user.
> FACTORY: Reset every parameter to the factory set default.
The Ego11 leaves the factory set in this way.
> NPPL: Load a set of parameters that configures the Ego11
to comply with the NPPL rules governing firing modes.
1,2
> PSP 10: Load a set of parameters that configures the
Ego11 to comply with the PSP rules governing firing modes
in lower divisions (10bps).
1,2
> PSP 12: Load a set of parameters that configures the
Ego11 to comply with the PSP rules governing firing modes
in higher divisions (12bps).
1,2
> MS10: Load a set of parameters that configures the Ego11
to comply with the 2010 Millennium Series rules governing
firing modes.
1,2
> CANCEL:
Editing is cancelled and the parameter remains
unchanged.
SAVE
THE SAVE PRESET PARAMETER
This parameter is used to save the
current set of parameters as a user
defined custom preset configuration.
This parameter has the following
choices:
> USER 1: Save the current parameters
as the preset
‘USER 1’ .
> USER 2: Save the current parameters as the preset
‘USER 2’ .
> CANCEL: Editing is cancelled and the parameter
remains unchanged.
1
Some presets and fire modes may only be available in certain
countries and on some models of the Ego11.
2
All presets are correct at time of printing. It is the users
responsibility to ensure that the loaded preset complies with the
event rules the marker is intended to be used in.
36.
ADVANCED SET-UP