Manual

FSD DLY
THE FIRST SHOT DROP-OFF DELAY
PARAMETER
The time that has to elapse before the
FDS COMP is applied to a shot following
a previous shot. This parameter can be
set between 00:00 and 04:00 minutes.
FILTER
THE FILTER MENU
The parameters on the FILTER menu are all used
to tune the Ego11’s software filters which prevent
the Ego11 from firing unless all of the necessary
conditions are met. The factory default settings will
be suitable for most set-ups, however certain loader
and trigger set-ups may require modification of one or
more of these parameters.
DEBOUNCE
THE DEBOUNCE PARAMETER
The DEBOUNCE parameter is used to
combat any trigger bounce that might
occur in the Ego11 and can be set
between level 1 and level 9 in one level
increments.
> LEVEL 9: Level 9 providing the most
filtering (least ‘bouncy’).
> LEVEL1: Level 1 providing the least filtering (most
‘bouncy’).
> CANCEL: Cancel editing and leave the parameter
unchanged.
EMPTY
THE BREECH EMPTY TIME PARAMETER
In order for the BBSS to function
correctly it must first detect that the
Bolt is fully retracted and the breech is
empty, and then detect that a paintball is
loaded into the breech before the Ego11
is allowed to fire. The parameter can be
set between 1.0 and 20.0ms in 0.5ms
increments.
(CONTINUED OVERLEAF)
ORIENTATION
USING THE EGO11
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES & ACCESSORIES
ECLIPSE E-PORTAL
INDEX
QUICK SET-UP
CONTENTS
41.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE