Manual

ACCESSING THE MENU
SYSTEM
To access the Main Menu from the Run Screen double-
click the button and the first item on the Main
Menu will be displayed. Alternatively, push and hold
the button for 2 seconds.
Some of the parameters in the menu system can have
a tournament lock applied to them. This lock can be
toggled on and off by pressing to Tournament Lock
button on the Circuit Board
(SEE A IN FIG 13A). If you
try to select a parameter that is locked, the locked
display will show on the screen.
MOVING AROUND THE
MENUS
Press and release the button to display the next
item on the menu. When the last menu item is
displayed, pressing the button will display the first
item. Press and release the button to display the
previous item on the menu. When the first menu item
is displayed, pressing the button will display the
last item. When the displayed item is a branch, as
indicated by an animation on the right of the screen,
press the button to move to another menu.
ALTERING
PARAMETERS
When the displayed item is a parameter,
as indicated by a parameter value on
the right of the screen, pressing the
button will activate the EDIT mode which
allows the parameter value to be altered.
When EDIT mode is active, the black box
surrounding the text disappears. There
are two types of parameter, numeric
parameters and choice parameters.
A numeric parameter has a numeric value whereas
a choice parameter is one that has a small number
of distinct choices. Altering parameter values is
essentially the same for both types of parameter.
To alter a numeric parameter, first activate the EDIT
mode. Press the button to increase the parameter
value one step at a time. Press and hold the button
to increase the parameter value rapidly. When the
value reaches it’s maximum it will revert to it’s
minimum value. Press the button to decrease the
parameter value one step at a time. Press and hold the
button to decrease the parameter value rapidly.
When the value reaches it’s minimum it will revert to
it’s maximum value. When the required parameter
value is displayed press the button to accept the
value and end the EDIT mode.
To alter a choice parameter, first activate the EDIT
mode. Press the button to display the next choice in
the list. When the last choice is displayed, pressing
will display the first choice in the list. Press the
button to display the previous choice in the list. When
the first choice is displayed, pressing the button will
display the last choice in the list. When the required
choice is displayed press the button to accept the
choice and end the EDIT mode. If the displayed choice
is cancel then pressing the button will end the EDIT
mode and restore the parameter to the value that is
was prior to editing.
THE MARKER CAN BE FIRED WHILE NAVIGATING
ALL MENUS AND PARAMETERS.
FIG 13A
A
34.
ADVANCED SET-UP