Manual

Time in milliseconds (ms) that a paintball must be in the breech for the Ego11 to be ready
to fire.
Time in milliseconds (ms) that the Trigger must be pulled for a shot to be fired.
Time in milliseconds (ms) that the Trigger must be released before a pull can be recorded.
Percentage at which the Trigger Opto sensor pull point is set (TRIGGER dependant).
Percentage at which the Trigger Opto sensor release point is set (TRIGGER dependant).
Return to Main Menu.
Use Opto sensor to detect Trigger operation.
Use Micro-switch to detect Trigger operation.
Cancel Trigger detection method selection.
Select standard solenoid power level.
Select high power level for solenoid.
Cancel solenoid power level selection.
Turn off audible indicator.
Turn on audible indicator.
Cancel audible indicator selection.
Turn off audible tone when any button is pressed (SOUND dependant).
Turn on audible tone when any button is pressed (SOUND dependant).
Cancel audible tone selection.
Time in seconds that the backlight comes on for (00:00 = no backlight).
Percentage of red light in backlight (BACKLIGHT dependant).
Percentage of green light in backlight (BACKLIGHT dependant).
Percentage of blue light in backlight (BACKLIGHT dependant).
AUX socket output off.
AUX socket output on.
Cancel AUX socket selection.
1.0 - 20.0 ms
3.0 - 25.0 ms
3.0 - 25.0 ms
51 - 99%
1 - 49%
OPTO
SWITCH
CANCEL
NORMAL
HI POWER
CANCEL
OFF
ON
CANCEL
OFF
ON
CANCEL
00:00 - 00:20
0 - 100%
0 - 100%
0 - 100%
OFF
ON
CANCEL
PULL TM
BACK
RELEASE TM
PULL PT*
RELEASE PT*
TRIGGER
SOLENOID
SOUND
TONES*
BACKLIGHT
RED LEVEL*
GRN LEVEL*
BLU LEVEL*
AUX OUT
HARDWARE
FULL
MAIN MENU
32.
MENU TREE