User's Manual

CONTINUED

nsert the front spring (silver in colour) into the LPR cap, so

that it rests neatly on the adjuster screw SEE FIGURE 11.5.

Place the gold coloured spring onto the LPR piston and

insert piston and spring into the LPR cap, o-ring end rst

SEE FIGURE 11.6.

Before screwing the LPR cap back onto your Ego10, use a

dry cotton bud to clean the 010 NBR 70 o-ring inside the

LPR body SEE FIGURE 11.7. Lubricate this seal using a

light gun oil, such as Eclipse Gun Oil.

Replace the LPR cap by screwing it onto the LPR body in

the Ego10 SEE FIGURE 11.8.

FIG 11.6 FIG 11.7

FIG 11.8

FIG 11.5

WARNING: IF YOU ARE AT ALL UNSURE OF PERFORMING

THE MAINTENANCE PROCEDURE PLEASE CONTACT

YOUR NEAREST ECLIPSE SERVICE CENTRE. SEE PAGES

7273

WARNING

CONTENTS

ORIENTATION

QUICK SET-UP

USING YOUR EGO10

ADVANCED SET-UP

MENU TREE

MAINTENANCE

FAULT FINDING

SERVICE CENTERS

PARTS LIST

SPARES & ACCESSORIES

INDEX

53.

MAINTENANCE

QUICK GUIDE