User's Manual

PRESET
THE PRESET MENU
In order to simplify the set up of the Ego10 a number of
preset congurations are available for selection. Choosing
one of these presets will cause all of the necessary
parameters to be set in such a way as to make the Ego10
comply with the rules governing a particular paintball
league**. It is also possible for the user to save up to two
preset congurations of their own.
LOAD
THE LOAD PRESET PARAMETER
This parameter is used to load the required
preset conguration and has the following
choices:
> USER 1: Load a set of custom ring mode
parameters that have been previously saved
by the user.
> USER 2: Load a set of custom ring mode
parameters that have been previously saved
by the user.
> FACTORY: Reset every parameter to the factory set
default. The Ego10 leaves the factory set in this way.
> NPPL: Load a set of parameters that congures the
Ego10 to comply with the 2008 NPPL rules governing ring
modes.
> PSP 10: Load a set of parameters that congures the
Ego10 to comply with the PSP rules governing ring
modes in lower divisions (10bps).
> PSP 12: Load a set of parameters that congures the
Ego10 to comply with the PSP rules governing ring
modes in higher divisions (12bps).
> MS10: Load a set of parameters that congures the
Ego10 to comply with the 2010 Millennium Series rules
governing ring modes.
> CANCEL: Editing is cancelled and the parameter remains
unchanged.
SAVE
THE SAVE PRESET PARAMETER
This parameter is used to save the current
set of parameters as a user dened custom
preset conguration.
This parameter has the following choices:
> USER 1: Save the current parameters as
the preset ‘USER 1’.
> USER 2: Save the current parameters as the preset ‘USER
2
’.
> CANCEL: Editing is cancelled and the parameter remains
unchanged.
NOTE: ALL PRESETS ARE CORRECT AT TIME OF PRINTING.
PLEASE CHECK WITH THE EVENT ORGANISER TO MAKE
SURE THE ABOVE PRESETS ARE STILL CONSIDERED LEGAL.
36.
ADVANCED SET-UP