Manual
CONTINUED
When the exhaust valve is in the correct place, you will be
able to see the closed side through the valve plug hole in
the Ego10 body SEE FIGURE 17.12.
Using a 1/8” hex key replace the FRM screw that secures
the LPR body into the marker body
SEE FIGURE 17.13.
Make sure that the exhaust valve guide is lined up correctly
and then take a 1/8” hex key and replace the valve plug
SEE FIGURE 17.14.
You have now successfully stripped and cleaned your
Ego10 valve assembly. See page 58 on how to attach the
Ego10 frame.
FIG 17.12
FIG 17.13
FIG 17.14
NOTE: ENSURE THAT THE LPR BODY IS IN THE CORRECT
ORIENTATION BEFORE ATTEMPTING TO REPLACE THE FRM
SCREW. THE LARGER OF THE TWO HOLES ON THE LPR
BODY SHOULD BE AT THE BOTTOM WHEN ALIGNING THE
HOLES WITH THE EGO10 BODY.
WARNING: IF YOU ARE AT ALL UNSURE OF PERFORMING
THE MAINTENANCE PROCEDURE PLEASE CONTACT
YOUR NEAREST ECLIPSE SERVICE CENTRE. SEE PAGES
7273
WARNING
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO10
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
65.
MAINTENANCE
MAINTENANCE
QUICK GUIDE