Manual
CONTINUED
I
nsert the front spring (silver in colour) into the LPR cap, so
that it rests neatly on the adjuster screw SEE FIGURE 11.5.
Place the gold coloured spring onto the LPR piston and
insert piston and spring into the LPR cap, o-ring end rst
SEE FIGURE 11.6.
Before screwing the LPR cap back onto your Ego10, use a
dry cotton bud to clean the 010 NBR 70 o-ring inside the
LPR body SEE FIGURE 11.7. Lubricate this seal using a
light gun oil, such as Eclipse Gun Oil.
Replace the LPR cap by screwing it onto the LPR body in
the Ego10 SEE FIGURE 11.8.
FIG 11.6 FIG 11.7
FIG 11.8
FIG 11.5
WARNING: IF YOU ARE AT ALL UNSURE OF PERFORMING
THE MAINTENANCE PROCEDURE PLEASE CONTACT
YOUR NEAREST ECLIPSE SERVICE CENTRE. SEE PAGES
7273
WARNING
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO10
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
53.
MAINTENANCE
MAINTENANCE
QUICK GUIDE