Manual
HARDWRE
THE HARDWARE MENU
The Hardware Menu comprises parameters that control
low level functionality of the Ego9 electronic hardware.
TRIGGER
THE TRIGGER DETECTION PARAMETER
The Ego9 is fitted with a dual trigger pull detection
system. A non-contact Opto-electronic
trigger sensor arrangement is used
to detect trigger movement whilst
a micro - switch is used to provide a
more traditional tactile feedback for
the trigger. The TRIGGER parameter is
used to select which system is used.
The choices available are as follows:-
> OPTO:
Select the Opto sensor for
trigger pull detection.
> SWITCH:
Select the micro-switch for
trigger pull detection.
> CANCEL:
Cancel editing and leave
the parameter unchanged.
SOUND
THE SOUND PARAMETER
The Ego9 board is capable of emitting
a variety of sounds to audibly signal
when certain functions have been
performed, including ,but not
limited to, powering up, powering
off, changing the BBSS mode and
successfully changing parameters.
This parameter determines if this
feature is switched on or off, switching
it on will cause more drain on the
battery. The choices available for this
parameter are:
>OFF: Sounds switched off.
>ON: Sounds switched on.
>CANCEL: Cancel editing and leave
the parameter unchanged.
TONES
THE TONES PARAMETER
This parameter determines if the
Ego9 emits a tone each time any of
the pushbuttons on the Navigation
Console are activated. As part of
the Smart menu system the TONES
parameter will only be shown in
the Hardware Menu if the SOUND
parameter is switched ON. The choices
available for this parameter are:
>OFF: Tones switched off.
>ON: Tones switched on.
>CANCEL: Cancel editing and leave
the parameter unchanged.
52.
ADVANCED SET-UP
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO9
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
53.
MAINTENANCE
MAINTENANCE
QUICK GUIDE