Manual
OFF ROF
THE RATE OF FIRE WHEN BBSS OFF PARAMETER
The
OFF ROF parameter is used to control how fast the
Ego9 cycles when the Break Beam Sensor System is
disabled. This parameter can be set between 4.0 and
15.0 balls per second and should always be set to the
slowest speed of the loading system in use.
RMP SET
THE RAMP SETTINGS MENU
This menu is only available when ramping has been
selected with the MODE parameter and comprises a list
of parameters that control the way in which the Ego9
ramps, as shown below:
TYPE
THE RAMP TYPE PARAMETER
This parameter is used to select the ramping style and
has the following choices:-
> STEP:
Step ramping will cause the Ego9 to shoot in
semi-automatic until a number of trigger pulls, set by
PULL NO, have been made at a minimum pull rate, set
by KICK IN. At this point the rate of fire will step up to
the maximum rate of fire as set by MAX ROF (or the
maximum loader speed if the ROF CAP parameter is
set to off). Ramping is maintained as long as the user
continues to pull the trigger at a required rate set by
SUSTAIN.
> LINEAR:
Linear ramping will cause the Ego9 to shoot
in semi-automatic until a number of trigger pulls, set
by PULL NO, have been made at a minimum pull rate,
set by KICK IN. At this point the rate of fire will equal the
rate of trigger pulls increased
by the percentage
specified by RATE up to
a maximum rate of fire
as set by MAX ROF, if the
ROF CAP is on. Ramping is
maintained as long as the
user continues to pull the
trigger at a required rate
set by SUSTAIN.
> CANCEL:
Editing is
cancelled and no changes
are made to the parameter.
RATE
THE LINEAR RAMP RATE PARAMETER
The parameter is only available when
LINEAR ramping
is selected and is used to set the percentage increase in
rate of fire over rate of trigger pulls.
For example, if the user is pulling the trigger at a rate
of 10 pulls per second and the RATE parameter is set to
50% then the rate of fire is 10 plus 50% extra which is
15 balls per second.
This parameter can be set between 0 and 100% in 10%
increments.
40.
ADVANCED SET-UP
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO9
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
41.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE