User's Manual

THE RELEASE
PARAMETER
(RELEASE)
The RELEASE parameter is used to set the minimum amount of
time that the trigger must be released before it is recognised as a
valid trigger release. This parameter can be set between 3.0 and
25.0 milliseconds in 0.1 millisecond increments.
THE BAND HIGH
PARAMETER
(BAND HI)
The BAND HI parameter is only available if OPTO has been
selected in the HARDWARE menu. BAND HI defines the point at
which the trigger is considered pulled and is adjustbale between
51% and 99% in 1% increments.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO8
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
45.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE