User's Manual

ACCESSING THE
MENU SYSTEM
To access the Main Menu from the Run Screen, push and hold
the button for 1 second. The name of the currently selected
Preset will be displayed followed by the first item on the Main
Menu.
To access the Setup Menu from the Run Screen, push and hold
the internal button for 1 second. The first item on the Setup
Menu will then be displayed.
MOVING AROUND THE
MENUS
Press and release the button to display the next item on
the menu. When the last menu item is displayed, pressing the
button will display the first item.
Press and release the button to display the previous item on
the menu. When the first menu item is displayed, pressing the
button will display the last item.
When the displayed menu item is a branch, as indicated by an
animation on the right of the screen, press the button to
move to another menu.
ALTERING
PARAMETERS
When the displayed menu item is a parameter, as indicated
by a parameter value on the right of the screen, pressing the
button will activate the EDIT mode which allows the parameter
value to be altered. When EDIT mode is active, edit
indicators appear on the left of the screen as shown
in the screen below.
There are two types of parameter, numeric
parameters and choice parameters. A numeric
parameter has a value which is a number whereas
a choice parameter is one that has a small number
of distinct choices. Altering parameter values is
essentially the same for both types of parameter.
To alter a numeric parameter, first activate the EDIT mode. Press
the button to increase the parameter value one step at a time.
Press and hold the button to increase the parameter value
rapidly. When the value reaches it’s maximum it will revert to it’s
minimum value. Press the button to decrease the parameter
value one step at a time. Press and hold the button to
decrease the parameter value rapidly. When the value reaches it’s
minimum it will revert to it’s maximum value. When the required
parameter value it displayed press the button to accept the
value and end the EDIT mode.
To alter a choice parameter, first activate the EDIT mode. Press
the button to display the next choice in the list. When the
last choice is displayed, pressing will display the first choice
in the list. Press the button to display the previous choice in
the list. When the first choice is displayed, pressing the button
will display the last choice in the list. When the required choice is
displayed press the button to accept the choice and end the
EDIT mode. If the displayed choice is Cancel then pressing the
button will end the EDIT mode and restore the parameter to the
value that is was prior to editing.
NOTE: IF THE TOURNAMENT LOCK IS SET TO ‘OFF’ THEN THE MAIN
MENU AND SETUP MENU ARE JOINED TOGETHER WHICH MEANS
THAT THEY CAN BE ACCESSED IN EITHER OF THE TWO WAYS ABOVE.
EDIT INDICATORS
28.
ADVANCED SET-UP