User's Manual

USER INTERFACE
The Ego8 has a simple user interface through which all aspects
of it’s electronic control system can be monitored and adjusted
by means of the three pushbuttons and graphical LCD which
comprise the Navigation Console.
SWITCHING ON
Pressing and holding the button will switch the Ego8 on.
The LCD display will show the Ego8 logo. When the button is
released, the LCD will show the Run Screen, which is the screen
displayed during the normal use of the Ego8.
RUN SCREEN LAYOUT
The root of the user interface is the Run Screen. This screen is the
one most often displayed and provides the user with essential
feedback on the state of the Ego8. A typical Run Screen is shown
on the right.
On the left of the screen is a display option that is user selectable
from the Main Menu (see page 29). This option can be:-
> A GAME TIMER
> A SHOT COUNTER
> AN AVERAGE RATE OF FIRE
INDICATOR
> A PEAK RATE OF FIRE
INDICATOR
Briefly pressing the button will replace the display option
with the name of the currently selected Preset (see page 33).
On the right of the screen are up to five icons, each of which
provides graphical indication on different parts of the Ego8
control electronics.
BREAK-BEAM
SENSOR SYSTEM
INDICATOR
USER SELECTABLE
DISPLAY OPTION
LOCK INDICATOR
BATTERY LEVEL
INDICATOR
TRIGGER
DETECTION
INDICATOR
AUX OUT
INDICATOR
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO8
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
19.
USING YOUR EGO8
USING YOUR EGO8
QUICK GUIDE