Manual
CLEANING AND
LUBRICATING THE
BOLT
This procedure can be performed with the Ego8 gassed up as
well as de-gassed.
Raise the bolt pin and remove the bolt and bolt pin from the
Ego8 marker body.
Using a dry cotton bud remove any paint or grease from the
surface of the bolt (SEE FIGURE 16.1).
Lubricate the bolt and replace the bolt, locking the bolt pin into
the designated slot in the rammer.
NOTE: WE RECOMMEND THE USE OF ECLIPSE PAINTBALL GUN OIL
ON THE EGO8 RAMMER AND BOLT.
FIG 16.1
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO8
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
63.
MAINTENANCE
MAINTENANCE
QUICK GUIDE