Manual

(CONTINUED)
Insert one of the gold colored springs into the LPR cap, so that it
rests neatly in the adjuster piston (SEE FIGURE 11.5).
Place the 2nd gold coloured spring onto the LPR piston and
insert piston and spring into the LPR cap, o-ring end first
(SEE FIGURE 11.6).
Before screwing the LPR cap back onto your Ego8, use a dry
cotton bud to clean the seal inside the LPR body
(SEE FIGURE 11.7). Lubricate this seal using a light 3 in 1 oil, such
as Eclipse Oil.
Replace the LPR cap by screwing it onto the LPR body in the
Ego8 (SEE FIGURE 11.8).
FIG 11.6 FIG 11.7
FIG 11.8
FIG 11.5
54.
MAINTENANCE