Manual

THE RAMP TYPE
PARAMETER (TYPE)
This parameter is used to select the ramping style and has the
following choices:-
> STEP: Step ramping will cause the Ego8 to shoot in
semi-automatic until a number of trigger pulls, set by PULL
NO
, have been made at a minimum pull rate, set by KICK IN.
At this point the rate of fire will step up to the maximum rate
of fire as set by MAX ROF (or the maximum loader speed
if the rate of fire cap, ROF CAP is off). Ramping is maintained
as long as the user continues to pull the trigger at a required
rate set by SUSTAIN.
> LINEAR: Linear ramping will cause the Ego8 to shoot
in semi-automatic until a number of trigger pulls,
set by PULL NO, have been made at a minimum pull rate,
set by KICK IN. At this point the rate of fire will equal the rate
of trigger pulls increased by the percentage specified by
RATE up to a maximum rate of fire as set by MAX ROF, if the
rate of fire cap is off). Ramping is maintained as long as
the user continues to pull the trigger at a required rate set by
SUSTAIN.
> CANCEL: Editing is cancelled and no changes are
made to the parameter.
THE LINEAR RAMP
RATE PARAMETER
(RATE)
The parameter is only available when Linear Ramping is selected
and is used to set the percentage increase in rate of fire over rate
of trigger pulls.
For example, if the user is pulling the trigger at a rate of 10 pulls
per second and the RATE parameter is set to 50% then the rate of
fire is 10 plus 50% extra which is 15 balls per second.
This parameter can be set between 0 and 100% in 10%
increments.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO8
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
37.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE