Manual
THE LOAD PRESET
PARAMETER CONT...
> USER 1:
Load a set of custom firing mode parameters
that have been previously saved by the user.
> USER 2:
Load a second set of custom firing mode
parameters that have been previously saved by the user.
With the exception of
FACTORY each of the Presets changes
only those parameters that control the firing mode of the Ego8,
leaving Filter, Timing and Hardware parameters unchanged.
THE SAVE PRESET
PARAMETER (SAVE)
This parameter is used to save the current set of parameters as
a user defined custom Preset configuration. This parameter has
the following choices:-
> USER 1:
Save the current parameters as the Preset
‘USER 1’
> USER 2:
Save the current parameters as the Preset
‘USER 2’
> CANCEL:
Editing is cancelled and the parameter
remains unchanged.
THE FIRING MODE
PARAMETER (MODE)
This parameter is used to select the firing mode of the Ego8 and
has the following choices:
> SEMI:
This is the default and in this firing mode the
Ego8 will fire one shot for every trigger pull
> RAMP:
In this firing mode, the rate of fire is increased
above the rate at which the trigger is pulled once certain
criteria have been met. These criteria are set by the
parameters on the RAMP SET menu
> CANCEL:
Editing is cancelled and the parameter is
unchanged
PLEASE NOTE: CERTAIN MODES MAY ONLY BE AVAILABLE IN
CERTAIN COUNTRIES AND ON CERTAIN MODELS OF THE EGO8.
NOTE: THE CURRENT PRESET CONFIGURATION CAN BE VIEWED
FROM THE RUN SCREEN BY PRESSING THE BUTTON.
34.
ADVANCED SET-UP