Manual
THE TOURNAMENT
LOCK PARAMETER
(LOCK)
The Ego8 has a tournament lock which prevents the user from
making changes to any parameter that affects the way in which
the Ego8 shoots without the use of tools.
This parameter is used to set the state of the tournament lock
and has the following choices:-
> OFF:
Turn on the tournament lock. The SETUP menu is
added to the MAIN menu, making it easily accessible by pressing
and holding the button.
> ON:
Turn off the tournament lock. The SETUP menu is
only accessible by removing the right hand cheek of the rubber
grips and then pressing and holding the red SETUP button on
the circuit board.
> CANCEL:
Cancel selection and leave the parameter
unchanged.
THE PRESET MENU
(PRESET)
In order to simplify the set up of the Ego8 a number of Preset
configurations are available for selection. Choosing one of these
presets will cause all of the necessary parameters to be set in
such a way as to make the Ego8 comply with the rules governing
a particular paintball league. It is also possible for the user to save
up to two Preset configurations of their own.
THE LOAD PRESET
PARAMETER (LOAD)
This parameter is used to load the required Preset configuration
and has the following choices. With the exception of FACTORY
each of the Presets changes only those parameters that control
the firing mode of the Ego8, leaving Filter, Timing and Hardware
parameters unchanged.
> FACTORY:
Reset every parameter to the factory set
defaults. The Ego8 leaves the factory set in this way and this
is also described on the Run Screen as SEMI.
> NPPL:
Load a set of parameters that configures the
Ego8 to comply with the 2007 NPPL rules governing firing
modes.
> PSP:
Load a set of parameters that configures the Ego8
to comply with the 2007 PSP governing firing modes
> MILLEN:
Load a set of parameters that configures the
Ego8 to comply with the 007 Millennium Series
rules governing firing modes.
> CFOA:
Load a set of parameters that configures the
Ego8 to comply with the 2007 CFOA rules governing firing
modes.
> CANCEL:
Editing is cancelled and the parameter
remains unchanged.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO8
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
33.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE