Manual
T-SLOT
MOUNTING SYSTEM
The Ego8 utilises a T-slot arrangement to mount the OOPS to
the bottom of the frame. The T-slot is an improvement over the
dovetail mounting system found on most paintball markers,
and is much more able to withstand the rigours of modern
tournament paintball.
For backwards compatibility there are industry standard
mounting holes in the base of the frame for mounting third
party air source adaptors (ASAs).
MACROLINE HOSING
AND ELBOWS
To aid the longevity of your macroline hosing, it is very important
to remove it from (and install it back into) the fittings in the
correct manner:
Pull back the collet section of the macroline fitting and keep the
collet depressed.
Pull the macroline hose out of the macroline fitting and release
the collet.
Before installing the macroline hose into the macroline fitting
ensure that the end has been trimmed correctly to ensure a tight
fit in the fitting.
IF YOU EVER REMOVE THE MACROLINE HOSE FROM THE FITTING,
ALWAYS CHECK THE CONDITION OF YOUR MACROLINE HOSING AND IF
IT IS WORN OR THE WRONG LENGTH REPLACE IT IMMEDIATELY.
WARNING
T-SLOT
MOUNT
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO8
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
13.
USING YOUR EGO8
USING YOUR EGO8
QUICK GUIDE