User's Manual

CLEANING AND
LUBRICATING THE BOLT
This procedure can be performed with the Eclipse Ego7
gassed up as well as de-gassed.
Raise the bolt pin and remove the bolt and bolt pin from the
Eclipse Ego7 marker body.
Using a dry Q-tip remove any paint or grease from the
surface of the bolt (SEE FIGURE 15.1).
Lubricate the bolt and replace the bolt, locking the bolt pin
into the designated slot in the rammer.

NOTE: WE RECOMMEND THE USE OF ECLIPSE PAINTBALL
GUN OIL ON THE EGO RAMMER AND BOLT.
