User's Manual

(CONTINUED)
Lubricate all of the seals on the rammer shaft and replace
the rammer into the rear of the Eclipse Ego7 body with the
bumper at the back (SEE FIGURE 12.7).
Note: Use Eclipse Paintball Gun Oil.
Replace the rammer cap, using the 3/16" hex key to secure
it into the Eclipse Ego7 body (SEE FIGURE 12.8).
Do Not over tighten the rammer cap screw.
Noting the position of the rammer in the Eclipse Ego7 body
(SEE FIGURE 12.9), replace the bolt and locate the bolt pin into the
designated groove in the rammer shaft (SEE FIGURE 12.10).
 














