User's Manual
(CONTINUED)
Insert the 1st Gold coloured spring into the LPR cap, so that
it rests neatly in the adjuster piston (SEE FIGURE 11.5).
Place the 2nd Gold coloured spring onto the LPR piston and
insert piston and spring into the LPR cap, O-ring end rst
(SEE FIGURE 11.6).
Before screwing the LPR cap back onto your Eclipse Ego7,
use a dry Q-tip to clean the seal inside the LPR body
(SEE FIGURE 11.7). Lubricate this seal using a light 3 in 1 oil.
Replace the LPR cap by screwing it onto the LPR body in
the Eclipse Ego7 (SEE FIGURE 11.8).