User's Manual


 
 
 
 
 
 
 
 
 

 
 
 

 
 


 

Set the DEBOUNCE TIME
Set the EMPTY BREECH DETECTION TIME
Set the BALL DETECTION TIME
Set the TRIGGER PULL TIME
Set the TRIGGER RELEASE TIME
Set the BAND HIGH VALUE
Set the BAND LOW VALUE
Set the TRIGGER TRANSITION TOLERANCE
Return to the SET-UP MENU
Turn TRAINING MODE ON
Turn TRAINING MODE OFF
Return to the
SET-UP MENU
Choose the TRIGGER SENSOR METHOD
Choose the power level of the BBSS
Choose to enable the BEEPER function
Choose to send a
SIGNAL OUT each time the
trigger is pulled
Return to the
SET-UP MENU
Return to the REGULAR DISPLAY MODE

 
 
 
  
 
 
 

 
 
 
 
 
Choose the TYPE of ramping
Choose the
RATE at which the ramping occurs
Choose the
PULL NUMBER on which ramping
Choose the rate of re required for ramp to KICKIN
Choose the rate of re required to SUSTAIN ramp
Specify the time in which ramp can
RESTART
Return to the SET-UP MENU
Set the DWELL TIME
Set the FIRST SHOT DROP OFF
Set the BACKLIGHT TIME
Set the POWER OFF TIME
Return to the SET-UP MENU
SET-UP MENU CONTINUED












