User's Manual

Use the and buttons to scroll through the options and
once you have selected the option that you require press the
button to select that option and return to the TRAINING
screen as part of the SET-UP Menu
HARDWARE
The HARDWARE Menu allows the user to optimise their
Hardware settings. You can now choose the method of
sensing the trigger movement, which level you wish to
power the BBSS at, and whether or not you wish the beeper
and signal out functions to be enabled.
NOTE: The Beeper (BEEPER) and Signal Out (SIG OUT)
features can be enabled or disabled on any Ego 7, but will
not function unless the relevant expansion board is installed.
To alter the TRIGGER setting, scroll through the Hardware
Menu until TRIGGER is displayed. The current setting
for the TRIGGER will be displayed on the right hand side
of the screen. To alter the state of the TRIGGER, press
the button to enter the parameter and the edit indicators
will appear.
Use the and to buttons scroll through the options and
once you have selected the option that you require press the
button to select that option and return to the TRIGGER
screen as part of the HARDWARE Menu .
To alter the BBSS setting, scroll through the HARDWARE
Menu until BBSS is displayed. The current setting for
the BBSS will be displayed on the right hand side of the
screen. To alter the state of the BBSS, press the button to
enter the parameter and the edit indicators will appear. Use
the and buttons to scroll through the options and once
you have selected the option that you require press
the button to select that option and return to the BBSS
screen as part of the HARDWARE Menu .
To alter the BEEPER setting, scroll through the HARDWARE
Menu until BEEPER is displayed. The current setting for
the BEEPER will be displayed on the right hand side of
the screen. To alter the setting of the BEEPER, press
the button to enter the parameter and the edit indicators
will appear. Use the and buttons to scroll through the
options and once you have selected the option that you
require press the button to select that option and return to
the BEEPER screen as part of the HARDWARE Menu.
To alter the SIGNAL OUT setting, scroll through the
HARDWARE Menu until SIG OUT is displayed. The current
setting for the SIGNAL OUT will be displayed on the right
hand side of the screen. To alter the setting of the SIGNAL
OUT, press the button to enter the parameter and the
edit indicators will appear. Use the and buttons to
scroll through the options and once you have selected the
option that you require press the button to select that
option and return to the SIGNAL OUT screen as part of the
HARDWARE Menu.












