User's Manual

SETTING THE
BALL DETECTION TIME
The BALL parameter denes how long a paintball has to sit
in the breech before it is considered ready to re.
Scroll through the FILTER Menu until the BALL parameter
is displayed.
The current value of the BALL DETECTION TIME (BALL) is
shown on the right hand side of the display see below.
Press the button to enter the
edit function and the edit indicators
will appear on the display.
Press and release the button
to increase the BALL value in 1-
millisecond increments. Press and
hold the button to increase the
BALL value more rapidly.
Press and release the button
to decrease the BALL value in 1-
millisecond increments. Press and
hold the button to decrease the
BALL value more rapidly.
Press to save the BALL
value and the edit indicators will
disappear from the display to
indicate that the value has been
accepted.
You have now returned to the
FILTER Menu.
SETTING THE
TRIGGER PULL TIME
The PULL parameter denes the amount of time that the
trigger pull must be detected for before it is recognised as a
valid trigger pull.
Scroll through the FILTER Menu until the PULL parameter
is displayed.
The current value of the trigger PULL TIME (PULL) is shown
on the right hand side of the display see below.
Press the button to enter the
edit function and the edit indicators
will appear on the display.
Press and release the button
to increase the PULL value in 1-
millisecond increments. Press and
hold the button to increase the
PULL value more rapidly.
Press and release the button
to decrease the PULL value in 1-
millisecond increments. Press and
hold the button to decrease the
PULL value more rapidly.
Press to save the PULL
value and the edit indicators will
disappear from the display to
indicate that the value has been
accepted.
You have now returned to the
FILTER Menu.












