User's Manual

THE FILTER MENU
The FILTER Menu provides access to parameters that are
used to control the various software lters.
Scroll through the SET-UP Menu until the FILTER is
displayed and then press Select. This will display EMPTY,
the rst item on the FILTER Menu see below.
Press the button to scroll down through each of the
items on the FILTER Menu. Once the last item has been
displayed, pressing the button will cause the rst item to
be displayed.
Press the button to scroll up through each of the items on
the FILTER Menu. Once the rst item has been displayed,
pressing the button will cause the last item to be
displayed.
Press the button to edit the displayed parameter.
Selecting BACK will return the display to the SET-UP Menu.
USING THE BREAK-BEAM
SENSOR SYSTEM
NOTE: The type of Break Beam Sensor System that comes
as standard with your Ego 7 will be dependant on the model
that you have purchased.
During the ring cycle, the breech sensor looks rst for an
empty breech and then for a paintball within the breech. Only
when the sensor has detected both conditions will it allow
the Eclipse Ego7 to be red. The sensor software lter allows
you to ne tune the operation of the Break-Beam Sensor
System by allowing you to specify how long the sensors
have to see an 'empty' breech for and how long they have to
see a ball for.












