User's Manual

T-SLOT
MOUNTING SYSTEM
The current industry standard Dovetail rail that is used to
connect the ASA to the frame has consistently proved to
be the weakest link for every manufacturer out there when
it comes to the durability of the system used to mount
the tanks to the guns. For that reason we have shunned
the awed design of the dovetail in favour of a new T-Slot
design. By using a T-shaped slide rail, as opposed to the
double V of the old fashioned dovetail, the ASA-To-Frame
interface has been drastically strengthened. There should
be no way that a well executed dive into a bunker should
dislodge the ASA now, but even if you feel you have to go
and use a different ASA there are still standard mounting
holes in the frame to t your own inferior rail and ASA.
MACROLINE HOSING
AND ELBOWS
To aid the longevity of your Macroline hosing, it is very
important to remove it from (and install it back into) the
ttings in the correct manner:
Pull back the collet section of the Macroline tting and keep
the collect depressed.
Pull the Macroline hose out of the Macroline tting and
release the collet.
Before installing the Macroline hose into the Macroline
tting ensure that the end has been trimmed correctly to
ensure a tight t in the tting.
IF YOU EVER REMOVE THE MACROLINE HOSE FROM
THE FITTING, ALWAYS CHECK THE CONDITION OF YOUR
MACROLINE HOSING AND IF IT IS WORN OR THE WRONG
LENGTH REPLACE IT IMMEDIATELY.
WARNING













