Manual
SYMPTOM POSSIBLE CAUSE
Ego7 is inconsistent.
Leaking Rammer Assembly ( Leak gets louder
when bolt is removed ).
How can I get the best performance out of
my gun?
,`L[\YUZP[ZLSMVMMHM[LYÄYPUN
When the Ego7 powers up, no game timer /
shot counter / rof indicator is displayed and the
N\U^PSSUV[ÄYL
Inline Regulator is supercharging.
Front ram shaft seal deteriorated.
Check your set-up.
Eye is dirty.
Eye is faulty.
Eye is out of place.
The trigger is permanently depressed.
Strip and clean Inline Regulator.
(SEE MAINTENANCE SECTION )
Replace front Rammer Shaft seal.
Using a force-fed loader ( Halo B, Pulse
or Reloader B2) with the Break-Beam
Sensor System enabled will give the highest
performance.
Clean the eyes.
Replace the eyes.
Re-Install Eyes. Check alignment.
Turn the front stop set screw in the top of the
Trigger counter-clockwise until the display reads
JVYYLJ[S`0M[OLYLPZZ\MÄJPLU[[YPNNLYHKQ\Z[TLU[
then turn the return force set screw counter
clockwise also.
SOLUTION
-/%=8LCK=@E;@E>