Manual
SETTING THE
TRIGGER RELEASE TIME
The RELEASEWHYHTL[LYKLÄULZ[OLTPUPT\THTV\U[VM
time that the trigger must be released before it is recognised
as a valid trigger release.
Scroll through the FILTER Menu until the RELEASE
parameter is displayed.
The current value of the trigger RELEASE TIME (RELEASE)
is shown on the right hand side of the display see below.
Press the button to enter the
edit function and the edit indicators
will appear on the display.
Press and release the button to
increase the RELEASE value in 1-
millisecond increments. Press and
hold the button to increase the
RELEASE value more rapidly.
Press and release the button to
decrease the RELEASE value in 1-
millisecond increments. Press and
hold the button to decrease the
RELEASE value more rapidly.
Press to save the RELEASE
value and the edit indicators will
disappear from the display to
indicate that the value has been
accepted.
You have now returned to the
FILTER Menu.
SETTING THE
BAND HIGH VALUE
The BAND HI parameter is only available if OPTO has been
selected in the HARDWARE menu. BAND HIKLÄULZ[OL
exact point in the trigger pull that is considered the activation
point.
Scroll through the FILTER Menu until the BAND HI
parameter is displayed.
The current value of the BAND HI setting is shown on the
bottom right hand side of the display see below.
Press the button to enter the
edit function and the edit indicators
will appear on the display.
Press and release the button
to increase the BAND HI value
in increments of 1%. Press and
hold the button to increase the
BAND HI value more rapidly.
Press and release the button
to decrease the BAND HI level
in increments of 1%. Press and
hold the button to decrease the
BAND HI value more rapidly.
Press to save the BAND HI
value and the edit indicators will
disappear from the display to
indicate that the value has been
accepted.
You have now returned to the
FILTER Menu.
+)%8;M8E:<;J<K$LG