Manual
THE TIMING MENU
The TIMING Menu provides access to parameters which
JVU[YVS[OL,NV»ZÄYPUNJ`JSL
Scroll through the Set-up Menu until
TIMING is displayed
and then press .This will display ROF CAP[OLÄYZ[P[LT
on the TIMING Menu.
Press the button to scroll down through each of the
items on the TIMING Menu. Once the last item has been
KPZWSH`LKWYLZZPUN[OLI\[[VU^PSSJH\ZL[OLÄYZ[P[LT[V
be displayed.
Press the button to scroll up through each of the items on
the TIMING4LU\6UJL[OLÄYZ[P[LTOHZILLUKPZWSH`LK
pressing the button will cause the last item to be
displayed.
Press the button to edit the displayed parameter.
Selecting BACK will return the display to the SET-UP Menu.
DWELL
The Dwell parameter controls the amount of time that the
solenoid is energized and therefore the amount of gas that is
released with each shot.
Scroll through the TIMING Menu until the DWELL parameter
is displayed. The current value of the DWELL is shown on
the right hand side of the display.
Press the button to enter the edit function and the edit
indicators will appear on the display.
Press and release the button to
increase the DWELL time in 0.1
millisecond increments. Press and
hold the button to increase the
DWELL time more rapidly.
Press and release the button to
decrease the DWELL time in 0.1
millisecond increments. Press and
hold the button to decrease the
DWELL time more rapidly.
Press to save the DWELL
time and the edit indicators will
disappear from the display to
indicate that the value has been
accepted.
You have now returned to the
TIMING Menu.
*-%8;M8E:<;J<K$LG