Manual
THE PEAK
RATE OF FIRE OPTION
The Peak Rate of Fire (PEAK ROF) option is one of two
^H`ZPU^OPJO`V\JHUTVUP[VY`V\YYH[LVMÄYL^OPSZ[\ZPUN
the Eclipse Ego. The Peak Rate of Fire screen looks like the
screen shown below:
The Peak Rate of Fire option calculates
both the current and maximum
Peak Rate of Fire achieved based
on the time between the closest two
consecutive shots.
The current Peak Rate of Fire is
displayed in the top right hand corner
of the display, whilst the maximum
Peak Rate of Fire is displayed in the
bottom right hand corner of the display.
To r eset the maximum Peak Rate
of Fire simply push and hold the
button for a one second period.
With the Break-Beam Sensor System
enabled and paint present, the Peak
Rate of Fire is only limited by the speed
of your loader. To achieve the highest
YH[LZVMÄYL^LYLJVTTLUK\ZPUNH
high speed loader such as the Reloader B2, Pulse or Velocity
Loader. With the Break-Beam Sensor System enabled and
UVWHPU[WYLZLU[[OLYH[LVMÄYL^PSSILHZ`V\Y,NV^PSSIL
\UHISL[VÄYL
To u se th e Peak Rate of Fire screen without shooting paint,
simply switch the Break-Beam Sensor System off using the
button. In this scenario the Peak Rate of Fire is only
limited to whatever value you have selected in the OFF ROF
option in the TIMING Menu.
THE GAME
TIMER MENU
Scroll through the Main Menu until the TIMER option is
displayed and then press . You have now entered the
GAME TIMER Menu.
By using the and buttons, you can scroll through the
menu as shown below:
To s et th e g am e t im er, simply select th e GAME option.
To s et th e a la rm ti me r, simply select t he ALARM option.
To set the starting method of the game timer, simply select
the START option.
To r etur n to t he Main Menu, scroll to the BACK option and
press .
)'%LJ@E>PFLI<>F.