Manual
SETTING THE
TRIGGER RELEASE TIME
Scroll through the FILTER Menu until the RELEASE parameter is displayed.
The current value of the TRIGGER RELEASE TIME (RELEASE) is shown on the right
hand side of the display see below.
Press the button to enter the edit function and the edit indicators
will appear on the display.
Press and release the button to increase
the RELEASE value in 1-millisecond increments.
Press and hold the button to increase the
RELEASE value more rapidly.
Press and release the button to decrease
the RELEASE value in 1-millisecond increments.
Press and hold the button to decrease the
RELEASE value more rapidly.
Press to save the RELEASE value and the edit
indicators will disappear from the display to indicate
that the value has been accepted.
You have now returned to the FILTER Menu.
SETTING THE
BAND HIGH VALUE
Scroll through the Filter menu until the BAND HI parameter is displayed.
The current value of the BAND HI setting is shown on the bottom right hand side
of the display see below.
Press the button to enter the edit function and the edit indicators
will appear on the display.
Press and release the button to increase
the BAND HI value in increments of 1%. Press
and hold the button to increase the BAND HI
value more rapidly.
Press and release the button to decrease
the BAND HI level in increments of 1%. Press
and hold the button to decrease the BAND HI
value more rapidly.
Press to save the BAND HI value and the edit
indicators will disappear from the display to indicate
that the value has been accepted.
You have now returned to the FILTER menu.
SETTING THE
BAND LOW VALUE
Scroll through the Filter menu until the BAND LO parameter is displayed.
The current value of the BAND LO setting is shown on the bottom right hand
side of the display see below.
Press the button to enter the edit function and the edit indicators
will appear on the display.
Press and release the button to increase
the BAND LO value in increments of 1%. Press
and hold the button to increase the BAND LO
value more rapidly.
Press and release the button to decrease
the BAND LO level in increments of 1%. Press
and hold the button to decrease the BAND LO
value more rapidly.
Press to save the BAND LO value and the edit
indicators will disappear from the display to indicate
that the value has been accepted.
You have now returned to the FILTER menu.
36
ADVANCED SET-UP
37
ADVANCED SET-UP
QUICKGUIDE