Manual
USING THE
FILTERING SYSTEMS
The Eclipse Ego incorporates two different ltering systems to allow the
maximum amount of ne tuning when setting up your marker. Both the
INTELLIGENT DEBOUNCE FILTER (ID FILTER) and the TRIGGER TRANSITION FILTER (TT
FILTER) are fully adjustable and can be used to completely eliminate bounce.
The ID FILTER is intended to be used independently of the TT FILTER, with
the user having the option to turn the TT FILTER on or off as and when it is
required.
Both the ID FILTER and the TT FILTER work by analyzing each trigger pull and
determining whether or not that trigger pull is a legitimate pull of the trigger
by the user, or one that has been caused by the gun bouncing, in which case
the algorithm will take steps to stop that bounce by varying the cycle time of
the marker.
There are ve adjustable parameters associated with the ID FILTER:
DEBOUNCE
This parameter is used to choose from 5 groups of standard lter settings
for your Ego and is also used to turn the TT FILTER on or off. The higher the
Debounce value, the less the marker is able to bounce.
TPUL
This parameter denes the amount of time that the trigger must be pulled for
in order to register a valid trigger pull. The greater the TPUL value, the less the
marker is able to bounce.
TREL
This parameter denes the amount of time that the trigger must be released
for in order to register a valid trigger release. The greater the TREL value, the
less the marker is able to bounce.
BAND HI
This parameter denes the point in the triggers movement at which the ID
FILTER begins to register a trigger pull. The greater the BAND HI value, the less
the marker is able to bounce.
BAND LO
This parameter denes the point in the triggers movement at which the ID
FILTER begins to register a trigger release. The lower the BAND LO value, the less
the marker is able to bounce.
There is one adjustable parameter associated with the TT FILTER:
TT TOLERANCE
This parameter works in conjunction with BAND HI and BAND LO and denes how
strictly the TT Filter applies its anti-bounce algorithm. The lower this value is,
the less the marker will be able to bounce
SETTING THE
DEBOUNCE LEVEL
This parameter is used to set the level of DEBOUNCE (anti-bounce) on your Ego.
It can also be used to turn the TT Filter on or off. Selecting the TT option from
the available parameters turns the TT Filter on, whilst selecting DEBOUNCE 1-5
turns the TT Filter off.
Scroll through the Filter menu until the DEBOUNCE parameter is displayed.
The current value of the DEBOUNCE setting is shown on the right hand side of
the display see below.
Press the button to enter the edit function and the edit indicators will
appear on the display.
Press and release the button to increase the DEBOUNCE
level in increments of 1. Press and hold the button to
increase the DEBOUNCE value more rapidly.
Press and release the button to decrease the DEBOUNCE
level in increments of 1. Press and hold the button to
decrease the DEBOUNCE value more rapidly.
Press to save the DEBOUNCE level and the edit
indicators will disappear from the display to indicate that
the value has been accepted.
You have now returned to the FILTER menu.
SETTING THE
TRIGGER PULL TIME
Scroll through the FILTER Menu until the PULL parameter is displayed.
The current value of the TRIGGER PULL TIME (PULL) is shown on the right hand
side of the display see below.
Press the button to enter the edit function and the edit indicators
will appear on the display.
Press and release the button to increase
the PULL value in 1-millisecond increments.
Press and hold the button to increase the
PULL value more rapidly.
Press and release the button to decrease
the
PULL
value in 1-millisecond increments.
Press and hold the button to decrease the
PULL
value more rapidly.
Press to save the
PULL
value and the edit
indicators will disappear from the display to indicate
that the value has been accepted.
You have now returned to the
FILTER
Menu.
34
ADVANCED SET-UP
35
ADVANCED SET-UP
QUICKGUIDE