Manual

USING THE
DISPLAY MENU
As both the TIMER and the SHOTS options from the DISPLAY Menu are covered in
their respective sections in the following pages we will start by looking at the
Rate of Fire options.
THE AVERAGE
RATE OF FIRE OPTION
Break-Beam Sensor System Indicator
Current Rate of Fire
Maximum Rate of Fire Achieved
Battery Level Indicator
THE GAME TIMER MENU
The Average Rate of Fire (AVG ROF) option is one of two ways in which you
can monitor your rate of re whilst using the Eclipse Ego. The Average Rate of
Fire screen looks like the screen to the left.
Unlike some other markers the Average Rate of Fire on the Eclipse Ego is
measured over a period of one second.
The current Average Rate of Fire is displayed in the top right hand corner
of the display, whilst the maximum Average Rate of Fire is displayed in the
bottom right hand corner of the display.
To reset the maximum Average Rate of Fire simply push and hold the
button for a one second period.
With the Break-Beam Sensor System enabled and paint present, the Average
Rate of Fire is only limited by the speed of your loader. To achieve the highest
rates of re we recommend using a high speed loader such as the Reloader B,
Q-loader or new VL Evolution. With the Break-Beam Sensor System enabled
and no paint present, the rate of re will be 0 as your Ego will be unable to
re.
To use the Average Rate of Fire screen without shooting paint, simply switch
the Break-Beam Sensor System off using the button. In this scenario the
Average Rate of Fire is only limited to whatever value you have selected in the
OFF ROF option in the TIMING Menu.
The Peak Rate of Fire (PEAK ROF) option is one of two ways in which you can
monitor your rate of re whilst using the Eclipse Ego. The Peak Rate of Fire
screen looks like the screen below:
The Peak Rate of Fire option calculates both the current and
maximum Peak Rate of Fire achieved based on the time
between the closest two consecutive shots.
The current Peak Rate of Fire is displayed in the top right hand
corner of the display, whilst the maximum Peak Rate of Fire is
displayed in the bottom right hand corner of the display.
To reset the maximum Peak Rate of Fire simply push and
hold the button for a one second period.
With the Break-Beam Sensor System enabled and paint
present, the Peak Rate of Fire is only limited by the speed of
your loader. To achieve the highest rates of re we recommend
using a high speed loader such as the Reloader B, Q-loader or new Velocity
Loader. With the Break-Beam Sensor System enabled and no paint present,
the rate of re will be 0 as your Ego will be unable to re.
To use the Peak Rate of Fire screen without shooting paint, simply switch
the Break-Beam Sensor System off using the button. In this scenario
the Peak Rate of Fire is only limited to whatever value you have selected in the
OFF ROF option in the TIMING Menu.
To set the game timer, simply select the GAME option.
To set the alarm timer, simply select the ALARM option.
To set the starting method of the game timer, simply select the START option.
To return to the Main Menu, scroll to the BACK option and press .
SELECT
FWD / RAISE
BACK / LOWER
Scroll through the Main Menu until the TIMER option is displayed and then
press . You have now entered the GAME TIMER Menu.
By using the and buttons, you can scroll through the menu as
illustrated below:
THE PEAK RATE OF FIRE
20
USING YOUR EGO
21
USING YOUR EGO
QUICKGUIDE