Manual

FIG-2
FIG-1
FIG-3
FIG-4
33
ELECTRONICS
USER INTERFACE PARAMETERS
FIG-1 - HARDWARE MENU
The HARDWARE menu contains items that are used to control the CS2 electronic hardware.
FIG-2 - BLUETOOTH PARAMETER
Used to enable the on-board Bluetooth module.
> ON: Enable Bluetooth
> OFF: Disable Bluetooth
A blue LED (in the top of the trigger guard)
will indicate the Bluetooth status.
> O: Disabled
> Single ash: Enabled
> Double ash: Connected
FIG-3 - SOUND PARAMETER
Used to enable sound.
> ON: Sound enabled.
> OFF: Sound disabled.
FIG-4 - CLICK TONE PARAMETER
Pushbutton tones can be independently disabled.
This item is only available if the SOUND parameter
is set to ON.
> ON: Tones enabled.
> OFF: Tones disabled.