Manual

FIG-1

FIG-3

FIG-2

FIG-4

ELECTRONICS

USER INTERFACE PARAMETERS

FIG-1 - TIMING MENU

The TIMING menu parameters control the energise time of the solenoid valve.

FIG-3 - FSD COMP PARAMETER

‘First Shot Drop-O’ is a reduction in velocity of

the rst shot when the marker has not been red

for some time. This parameter adds extra DWELL

time to the rst shot in order to compensate.

This parameter can be set between 0.0 and 5.0

milliseconds in 0.1 increments.

FIG-4 - FSD DLY PARAMETER

This sets the amount of time that must pass

before the FSD COMP is applied to a shot.

This parameter can be set between 00:00 and

04:00 minutes in 1 second increments.

FIG-2 - DWELL PARAMETER

Sets the amount of time that the solenoid valve

is energised during each ring cycle. Setting this

parameter too low will result in low velocity shots

and excessive velocity/shot uctuations.

If set too high the CS2 will waste gas.

This parameter can be set between 15.0 and

35.0 milliseconds in 0.1 increments.