Manual

FIG-1
FIG-2
A
A
B
14
INTRODUCTION
FIRMWARE VERSION
CHECK / UPDATE
FIG-1
To check which version of rmware your CS2 is currently running simply
follow the sequence below.
1
Push and hold the Select button
A
to switch the CS2 ON.
2
When the CS2 logo appears let go of the Select button.
3
The version screen (Fig-2) will now be displayed.
1
FIG-2
The Pri number
A
indicates the software version of the Primary circuit
board and the Sec number
B
indicates the software version of the
Secondary circuit board.
1 If you push and hold the Select button again once the version screen appears, this
screen will pause and show until you release the Select button.