User's Manual

46
If the 'Network Notification' option is disabled, you can scan
the air by calling up the quick access menu in 'Wi-Fi
Settings' and pressing the 'Search' button.
You can scan available Wi-Fi networks by bringing up
the context menu and selecting ‘Scan’.
To configure additional parameters, bring up quick menu
and select ‘Advanced’. Here you can find:
o Wi-Fi sleep policy. Selects conditions to switch
Wi-Fi to standby mode
o MAC address. Shows MAC address of the
device.
o IP address
o Use static IP – allows to configure network
settings manually.
To connect to the network manually, click 'Add Wi-Fi
network' option in 'Wi-Fi settings' sub-menu. In the opened
window, click the 'Network SSID' box and enter network
SSID name using the on-screen keyboard.
Below, you will find a drop-down list to select a network
protection method. 'No Protection' option is set by default.
Enter the access password using the on-screen keyboard in
textbox pops-up after protection method selection.
To simplify entering the password, you can check the
'Display password' box – in this case entered characters will