User's Manual

FM Radio

To listen to FM Radio you need to plug headset, which

will operate as antenna. To set channel, you can move a

slider across the screen or use playback control buttons.

You can save up to ten channels. To save channel, just

touch a button with number of preconfigured channel. If you

need to clear or change frequency, touch button

continuously and select required action from context menu.

In Settings section you can configure next parameters:

 Audio Mode – auto, stereo, mono or switch mode

 Audio Path – selects audio output device : headset,

speaker or none

 RDS Modes – toggles Radio Data System : displays

information, related to radio translation. This info is

transmitted by radio station

 Enable AF – alternative frequencies. This allows a

receiver to re-tune to a different frequency providing

the same station when the first signal becomes too

weak (e.g., when moving out of range). This can be

useful, for example, while moving in car

Advanced settings

 World Region

 Scan Step