User Manual

EAGLE
9
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
PROFILE P3_SURFACE normal PLA
The following parts must be sliced with the PROFILE P3_SURFACE (1-wall-print).
Please note the additional settings for the individual parts!
PLEASE NOTE In profile P3_SURFACE, there should not be more than one STL on the buildplate at the same
time, otherwise slicing errors can occur! Depending on your printer, a brim may not be required.
eagle-Servocovers-profile3.stl
MATERIAL PLA, ~ 2 g
ADDITIONAL SETTINGS
None required
If you have problems with printing, there
is a combined version in the Individual
parts folder.