User Manual

EAGLE
7
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
PROFILE P3_SURFACE normal PLA
The following parts must be sliced with the PROFILE P3_SURFACE (1-wall-print).
Please note the additional settings for the individual parts!
PLEASE NOTE In profile P3_SURFACE, there should not be more than one STL on the buildplate at the same
time, otherwise slicing errors can occur! Depending on your printer, a brim may not be required.
eagle-Body1-profile3.stl
MATERIAL PLA, ~ 88 g
ADDITIONAL SETTINGS
None required
eagle-Wing1-left/right-profile3.stl
MATERIAL PLA, ~ 37 g
ADDITIONAL SETTINGS
None required