User Manual

EAGLE
20
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT
Basic information
Installation of the TPU hinges
First insert the hinge into the movable flap and add a drop of liquid CA adhesive into the gap.
Wait for the glue to drain completely, then spray the activator on it.
Then put the flap in the wing until the flap touches the spacers and put a drop of CA glue on the hinge.
Wait again for the glue to run in, and then spray the activator on it.
Do not use too much glue, the flap must move easily!
These spacers ensure the correct
gap distance. Don´t remove!