User Manual

EAGLE

PRINTING & ASSEMBLING MANUAL

ASSEMBLING MANUAL

Basic information

Gluing the parts

To glue the fuselage and wing parts well, use medium-liquid CA adhesive.

First check whether the parts go well together. Then apply a lot of CA glue to the part with the connections

and all surfaces that will touch later (except the bowden tubes). Put the parts together and align the parts per-

fectly. If glue comes out, wipe with a cloth. Then spray activator spray on the glue points.

IMPORTANT For a strong connection, the adhesive surfaces should be sanded. Please only use fresh CA

glue and activator spray for curing! The adhesive connections must hold perfectly!

Connection pieces

This surfaces should be sanded