XP37W LCD TV USER’S GUIDE www.planar.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Table of contents 1. General Information ......................................................................................................... 3 2. Safety Precautions ............................................................................................................. 5 3. Features .............................................................................................................................. 7 4. Ports.............................
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Channel Scan .................................................................................................................... 39 Auto Scan.......................................................................................................................... 40 Manual Scan ..................................................................................................................... 42 Time Zone.........................................................
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 General Information This 37” wide active matrix TFT (thin film transistor) liquid crystal monitor is designed for use as a stand alone TV as well as a display device for video electronics appliances and personal computers. Important Information Warning: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Risk of electric shock. Do not open.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Thank You for Choosing This Product Your new LCD TV was built utilizing the latest advancements in television technology. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Safety Precautions 1. Cleaning: Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. 2. Water and moisture: Do not use the product near water or areas of high moisture content such as swimming pools, bathtubs or wet basements. 3.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 6. Lamp(s) Contain Mercury. Dispose According to Local, State, Federal Laws. 7. Stand: Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Use only mounting hardware recommended by the manufacturer.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Features List of Features Your TV is designed with the latest technology and is a high-performance unit that includes the following special features: ¾ Multiple input sources including Antenna terminal for Analog / Digital, D-SUB connector, HDMI connector, Composite, S-Video, and Component ports. ¾ Easy-to-use remote control and on-screen-display (OSD) menu system.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Ports Interface I VHF / UHF Antenna HDMI D-SUB AUDIO IN AC POWER SOCKET RF IN DIGITAL TV RF IN ANALOG TV Interface II VIDEO BOX S/P DIF Y1 Pb1 Pr1 L1 Y2 Pb2 Pr2 L2 Component IN 8 R1 SV1 L1 R1 AV1 L1 R1 R2 SV2 L2 R2 AV2 L2 R2 S-Video IN AV Subwoofer L R Composite IN Video & Audio OUT
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Control Buttons Main Power Switch Before operating the LCD display or remote control, users must press MAIN POWER switch to ON. The MAIN POWER switch is located at the bottom-left back of the LCD display (near by Power Inlet). Function Key These buttons control your TV’s basic features, including the on-screen mean. To use advanced features, you must use the remote control. POWER: turn the LCD-TV on or off.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Accessories LCD - TV USER’S MANUAL User’s manual Power Cord 10 Remote control & Batteries (AAA x2)
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Remote Control SELECT TV RATING 11
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Summary of Control Button Power control POWER button Selecting the primary signal source TV button AV/SV button CV button PC/HD button Menu Settings Menu button Exit / CC button UP/DOWN/LEFT/RIGHT TV Changing Channels UP button DOWN button 0~9 ; +100 button Last button Sound Control VOL+ button VOL- button Mute button MTS button PIP Control On / Off button △/▽ button SIZE button Audio / Video button Position button Layout button Other Function ARC button (Aspect
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Connections & Applications * How to connecting Video Device via HDMI ? This can be applied only if there is the HDMI Output connector on the external device. VIDEO DEVICE (ex. DVD Player or Set-top Box…) Interface I VIDEO L R Y Pb Pr HDMI L HDMI to HDMI Cable HDMI R * How to connecting Video Device via D-SUB ? D-SUB AUDIO IN PC Note: No sound connector is needed for an HDMI to HDMI connection.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 * How to connecting Video Device via DVI –HDMI ? This can be applied only if there is the HDMI Output connector on the external device. VIDEO DEVICE (ex. DVD Player or Set-top Box…) Interface I 1. VIDEO L R Y Pb Pr DVI / HDCP L DVI to HDMI Cable HDMI R 2. D-SUB AUDIO IN 1. Connect a DVI-to-HDMI cable or DVI-HDMI adapter between the HDMI/DVI connector On the TV and the DVI connector on the DVD player/ Set-top box. 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 * How to connecting Video Device via general cable ? Interface II VIDEO BOX RF IN ANALOG TV Component IN Y1 Pb1 Pr1 L1 Y2 Pb2 Pr2 L2 R1 R2 S-Video IN Composite IN SV1 L1 R1 AV1 L1 R1 SV2 L2 R2 AV2 L2 R2 Video & Audio Out AV S/PDIF L R Subwoofer This TV accept different Video Input, if video device has a connector with better quality, please connect the better one.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Controls & Adjustment A. General Adjustment Turning the LCD TV On and Off Plug the power cable into the AC-in socket located on the left rear of the LCD TV. Plug the other end into an electrical socket. Press the main POWER button located on the back of the left speaker. Once the main power button is engaged, press the power button on the remote control or use the power button located within the control buttons panel on underside of the TV to turn the TV on.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Switching PC/HD / Video / S-Video/ TV / Component Modes 1. Turn on the power. 2. Select an input source as described below: PC/HD button button AV/SV button TV button DTV/Menu button CV to switch to TV mode. to switch to PC and HDMI mode. (Analog or Digital) to switch to AV and S-Video mode. to switch to YPBPR mode (Component). to switch to DTV mode (ATSC). VIDEO SOURCE Switching Language Modes 1. Press the Menu button to display OSD from the main menu.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Setting the Sleep Timer You can set the Sleep Timer to automatically turn off the LCD TV. 1. Press the SLEEP button to display the Sleep Timer screen. 2. Press the SLEEP button to set the sleep timer (in 10 minute increments). 10 min →20 min → 30 min →40 min→ 50 min → 60 min →70 min →80min →90min →100min →110min→120min→ OFF SLEEP Note: 1. The Sleep Timer screen automatically disappears in 10 seconds. 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 B. PC Mode Adjustment Adjusting the Contrast & Black light Settings Each viewing mode supports separate adjustments for black light and contrast levels. PC mode is best viewed with middle black light and contrast levels as compared to other modes. Adjusting PC Settings ANALOG INPUT 1. Press the PC / HD button to set the main display to PC mode. Press the Menu button to display PC from the main menu. 2. Press the △ or ▽ button to access PC sub-menu. 3.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Adjusting Sound Settings 1. Press the Menu button to display SOUND from the main menu. CONTROL BUTTONS 2. Press the △ or ▽ button to access SOUND sub-menu. 3. Press the ◁ or ▷ button to select the settings. 4. Press the Exit button to exit from the menu or press the Menu to return to the previous screen. AVC: You can set AVC(Auto Volume Control ) options to ON or OFF. a.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 EQUALIZER: CONTROL BUTTONS a. Press the △ or ▽ button to access EQUALIZER option. b. Press the ▷ button to enter EQUALIZER menu. c. There are 6 EQUALIZER modes available: ﹝MANUAL﹞,﹝POP﹞,﹝JAZZ﹞ ﹝VOICE﹞, ﹝ROCK﹞, ﹝CLASSIC﹞ d. Selecting the MANUAL pre-set allows you to manually adjust the frequency response. e. Settings for POP , JAZZ , VOICE , ROCK and CLASSIC are pre-configured. You can’t change these settings.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 MANUAL: POP: JAZZ: VOICE: ROCK: CLASSIC: 22
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Viewing Picture-in-Picture ( PIP) PIP: While viewing content on the main display, you have the option to select a secondary signal as a sub-display in a picture in picture window. This feature allows you to watch two video sources simultaneously. Activating Picture-in-Picture 1. Press the Menu button to display FUNCTION From the main menu. 2. Press the △ or ▽ button to access FUNCTION sub-menu. 3. Press the ▽ button to select MULTI MODE option. 4.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 z POP: Show PIP side by side with the main source. CONTROL BUTTON Note: Numbers of Video source cannot be displayed at the same time.( refer to the Table on page25 ) Note: Used the Remote Control to Enable the PIP function 1. Press the PIP ON/OFF button. 2. Press the △ or ▽ button to select the PIP source. PIP Function Control Key 5. Press the △ or ▽ and ▷ button to access MULTI PICTURE option.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 6. Press the △ or ▽ button to select the settings for adjustment. z SUB SOURCE : You can select PIP source. z SIZE : Three different PIP sizes.﹝SMALL﹞, ﹝MIDDLE﹞,﹝LARGE﹞ z H-POSITION / V-POSITION : Press the W / X button can make PIP window move from corner to corner on the TV screen. z SWAP: To exchange the display of main source and sub-source.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 C. General TV Mode Adjustment Adjusting the TV settings 1. Press the TV button to set the main display to TV mode. Press the Menu button to display TV CHANNEL from the main menu. CONTROL BUTTONS Sound Options Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being broadcast, you can listen to Stereo, Mono or a Separate Audio Program. (SAP audio is usually a foreign-language translation).
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Adjusting Picture Settings 1. Press the Menu button to display PICTURE from the main menu. Then press the △ or ▽ button to select PICTURE MODE option. CONTROL BUTTONS 2. Press the ◁ or ▷ button to enter the USER menu. 3. Press the △ or ▽ button to select the desired item. Then press the ◁ or ▷ button to adjust ranges from minimum to maximum 4. Press the Menu button to return to the previous screen or exit from the sub-menu. .
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Memorizing Channels Your TV can memorize and store all of the available channels for both standard broadcast (antenna) and cable channels. After the available channels are memorized press the △ or ▽ button to view stored channels. You can also view any channel (even non-memorized) by directly entering the channel digits via the remote control. There are three steps to memorizing channels: 1. Selecting a TV signal input source 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Storing Channels (Automatic Method) 1. Press the Menu bottom to display TV CHANNEL from the main menu .Then press the ▽ button to select the AUTO SCAN option. 2. Press the ▷ button to run through all of the available channels and store them in memory. It may take a few minutes to acquire the available channels. CONTROL BUTTONS Adding and Erasing Channels (Manual Method) 1. Press the Menu bottom to display TV CHANNEL from the main menu . 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Changing Channels This LCD TV turner provides the ability to display up to 125 channels (1 to 125). To select a channel, enter the channel number using 1 to 3 digit numbers. Using the Channel Buttons 1. Press the channel (+ ) or channel (-) button to change channels. When you press the channel (+ ) or channel (-) button, the channels move up or down in sequence. You will see all the channels that have been memorized, (the channels must be memorized).
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Using Parent Control The Parent Control feature allows you to block channels from being viewed unless an unlock PIN code is correctly entered. Before Parent Control restrictions can be utilized, you must first create a PIN number. 1. Press the TV button . 2. Press the Menu button to display FUNCTION from the main menu. 3. Press the ▽ button to select the PARENT CONTROL option. NUMBER BUTTONS CONTROL BUTTONS 4.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 5. Enter your 4-digit PIN when you have finished entering the PIN. If the PIN is not correct, main menu will appear again. NUMBER BUTTONS NOTE: The factory default PIN code is 0000. 6. After entering a valid PIN number, the all of Parent Control sub options will appear. Press the △ or ▽ button to select the sub-menu. CONTROL BUTTONS Setting Up Your Personal ID Number (PIN) 1. Press the △ or ▽ button to select the CHANGE PASSWORD.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 2. Press the ▷ button to enter the BLOCKING PASSWORD menu. NUMBER BUTTONS 3. Enter your new 4-digit PIN XXXX,and the CONTROL BUTTONS BLOCKING CONFIRM menu will be on the screen. CONFIRM _ _ _ _ 4. Enter the 4-digit PIN the same as step3 XXXX again, IF the PIN is correct, “OK” will be on the screen. If the PIN is not correct, main menu will appear again.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 CONFIRM OK . 5. When you have finished entering the PIN, new setting to be operation. How to Enable / Disable Parent Control Under the PARENT CONTROL sub-options: 1. Press the △ or ▽ button to select the V-CHIP. CONTROL BUTTONS 2. Press the ◁ or ▷ button to select the V-CHIP ON or OFF. 3. Press the △ or ▽ button to select TV-RATING.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 4. Press the ▷ button to enter the TV-RATING, Rating menu will appear. TV-Y Young children TV-Y7 Children 7 and over -------------------------------------TV-G General audience TV-PG Parental guidance TV-14 Viewers 14 and over TV-MA Mature audience ALL : FV : Fantasy violence V : Violence S : Sexual situation L : Adult language D : Sexual suggestive dialog 5. Press the OK key to select Content BLOCK or UNBLOCK. 6.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Setting up restrictions using the “BLOCKING MOVIE” function. The MOVIE-RATING option utilizes the Motion Picture Association of America (MPAA) ratings system for determining blocked programming. When the parent control lock is enabled, the TV will automatically block any programs that are coded with objectionable ratings. Under the PARENT CONTROL sub-options: 1. Press the △ or ▽ button to select MOVIE-RATING. CONTROL BUTTONS 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 MOVIE-RATING R 上午 10:26 If the channel is set to a restricted channel, the parent control will automatically block it, and the BLOCK menu will appear: PASSWORD _ _ _ _ G : General audience (no restrictions). PG PG13 : Parental guidance suggested. : Parents strongly cautioned. R : Restricted. Children under 17 should be accompanied by an adult. NC17 X : Adults only under 17. : No Children Child Lock 1. Press the TV button . 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Viewing Closed Captions This LCD TV has the ability to decode and display closed caption content if supported by the program. These captions are usually used for the hearing impaired or for foreign language translations. Most VCR's can record the closed caption signal from television programs. Most pre-recorded commercial videotapes also provide closed captioning as well.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 D. DTV System Channel Scan Before you can use any of the channel buttons (CH +/ -, Fav.Ch), the available channels must first be scanned and memorized. Initial Screen The first time the receiver is powered on, you will see the message as below. As the signal is weak or the signal is not received , you will see the message as below. CONTROL BUTTONS 1. Press the Menu button to display DTV-CHANNEL from the main menu. Then you will see the DTV-CHANNEL sub-menu.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Auto Scan To automatically scan your channels, follow these steps: 1. Press the Menu button to display DTV-CHANNEL from the main menu ,and then press the △ or ▽ button to select AUTO SCAN option. MENU Button ENTER Button 2. Press the ◁ or ▷ button to enter the Auto Scan menu. MENU Button ENTER Button 40 3. Press the Enter to search channel.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 4. Once the digital TV signal is scanned, the channel number and the program name are shown on the “Scan List”. 5. No channel is found. You will see the message as below: 0 6. Press the Menu button to exit the screen.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Manual Scan You can add channels manually if they aren't detected by the Auto Scan utility using the following steps: 1. Press the Menu button to display DTV-CHANNEL from the main menu. NUMBER BUTTONS CONTROL BUTTONS 2. Press the △ or ▽ button to select the MANUAL SCAN option, and then press` the ▷ button to enter the Manual Scan menu. 3. Press the Enter button when the messages “press ﹝Enter﹞key to confirm system.” are shown then insert the channel number.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 4. If the ATSC signal is found and locked, you will see the Status message “Add No.XX 8VSB channel success". Press Exit or Menu to leave the menu and watch the program, or to scan other channels. 0 MENU Button ENTER Button Add No. 10 8VSB channel successfully. 5. If the signal is not locked, you will see a "no channel" message.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Time Zone 1. Press the Menu button to display DTV-CHANNEL from the main menu. 2. Press the △ or ▽ button to select TIME ZONE option. MENU Button ENTER Button 3. Press the ▷ button to enter the TIME ZONE settings. . 4. Press the Enter button to highlight the input column, and then press ◁ or ▷ buttons to change the time zone 30 minutes at a time. 5. Press the Menu or Exit buttons to exit the menu system.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Channel Control Change Passwords 1. Press the Menu button to display DTV-CHANNEL from the main menu. 2. Press the △ or ▽ button to select CHANNEL CONTROL option. CONTROL BUTTONS 3. Press ▷ button to enter the sub-menu.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 4. Press the ▷ button to enter the PASSWORD menu. NUMBER BUTTONS CONTROL BUTTONS 5. Enter your new 4-digit PIN twice. If the PIN is not correct, main menu will appear again. 6. when you have finished entering the PIN, new setting to be operation.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Edit Favorite Channel You can block access to channels or add them to your favorites list using the following steps: Under the CHANNEL CONTROL options: 1. Press the △ or ▽ button to select CHANNEL EDIT item. CONTROL BUTTONS Fav. CH Button 2. Press the ▷ button to enter the CHANNEL EDIT menu. 3. On the “Edit Channel” menu, press △ or ▽ to highlight Edit, and then press Enter. 4.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 DTV Rating Setting This menu lists both MPAA and USTV (FCC) Parental ratings. You can independently lock the MPAA and TV ratings. The locked ratings are indicated by the lock symbol. Under the CHANNEL CONTROL options: 1. Press the △ or ▽ button to select RATING item. CONTROL BUTTONS 2. Press the ▷ button to enter the RATING CONTROL menu. 3.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Rating ( Lock Programs by Rating ) Explanation of the MPAA and TV (FCC) Rating Systems: USTV (FCC) Age-Based Ratings TV-Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six. TV-Y7 Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. TV-G General audience.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Closed Caption Options At Digital TV mode. follow these steps to turn on closed captioning: You must use the remote control to enable / disable the function. If the I-Plate indicates that there is Closed Caption data on the current channel, pressing the CC or Exit / CC button on the remote control will display the C.C. Options list on the TV screen. 1. Press the Exit / CC button to display the C.C. Options. CC Button ENTER Button 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 INFO ( Information-Plate ) When you are watching digital channels, you can view the current program name and relevant information by pressing the “INFO” button to show I-Plate on screen.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 MTS ( Multitrack Language Selection-Design ) 1. Press the Enter / MTS button to display the Multi-language window. 2. Use △ or ▽ keys to highlight the language you want and press Enter. MTS Button ENTER Button 52 3. Press the Exit button to close the language window.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Favorite Channel List 1. When you are watching broadcast or cable TV channels, you can press the “FAV” button on the remote control to display the Favorite Channel List. 2. Use ◁ or ▷ keys to select the input source program lists. 3. Use △ or ▽ keys to highlight the program you want and press the Enter button. Fav. CH Button Note: The channel table of the Receiver will follow settings in this menu. To view ATSC channels only, select the ATSC channel list.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Selecting Digital Channels Selecting digital channel numbers is different from selecting traditional channel numbers. For example, To select digital channel number: 10 - 2 (1) press numeric key “1” and “0” (2) press the “▷ “button (3) press the numeric key “2” Freezing the Picture 1. Press the “FREEZE” button on the remote control to freeze the picture. The "Freeze" message will appear in the upper right corner of the screen. 2.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 E. Other Functions 1. Channel +/ - : Under TV mode, Channel +/ - keys are for changing channels. 2. Volume +/ - : Under any display mode, “Volume +/ -” are for adjusting sound volume. 3. ARC (Aspect Ratio Control): ˙Full : Expands 4:3 video sources both vertically and horizontally to fill the entire screen while keeping the original aspect ratio.. ˙Normal : Sets the aspect ratio to 4:3. There will be black bars to the left and right sides of the image.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Programming Remote Control A. Direct Device Code Setup Although your Remote Control is set up to provide control of this TV, you can specify other devices to be controlled, according to the following steps. [MODE] → <> (2 blinks) → 5- digit device codes (2 blinks) STEP 1 Locate the desired device in the Device code list. STEP 2 Select the [MODE] by pressing VCR, CBL, or AUX.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 B. Searching for a Device Code If none of the codes listed under Device Codes list match your device, you can search for a set of commands that will work. Your Remote will sample all the codes in its system to find one that will allow you to control your device. As the Remote searches its library, it starts with the most popular device in the category and works through to the end.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 C. Device Codes The following sections list the available device codes for each device mode button. If there is more than one code listed for device, enter the first one, and then try the POWER button. If the device turns on (or off), the code is correct. If it does not, try the next code. Repeat until you find a code that works.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Satellite Receivers AlphaStar 00772 NEC 01270 Chaparral 00216 Next Level 00869 Crossdigital 01109 Panasonic 00247, 00701 Paysat 00724 00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076, 01109, 00099, 01392, 01640, DirecTV 01442, 01414, 01108 01142, 00749, 01749, Dish Network 01005, 00775, 01505 Philips 00724, 01076, 00722, System 00099, 01442 Dishpro 01005, 00775, 01505 Proscan Echostar 01005, 00775,
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Audio Amplifiers Bose 30674 Sansui GE 30078 Shure 30321 30264 JVC 30331 Sony 30689 Marantz 30321 Soundesign 30078 Nakamichi 30321 Victor 30331 NEC 30264 Wards 30078 Optimus 30395 Yamaha 30354, 30133 Realistic 30395 --------------- ---------------------------- ADC 30531 Onkyo Aiwa 31405, 31243, 30121 Optimus Audio Amp/Tuners 60 30842, 30135 31023, 30670, 30531, 31074 Anam 31609, 31074 Panasonic 31518, 30039 Audiotroni
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 VCR ABS 21972 Gateway 21972 Admiral 20048, 20209 GE 20060, 20035, 20240 Aiko 20278 General 20045 Aiwa 20037, 20479 Go Video 20432 Alienware 21972 GoldStar 20037, America Action 20278 Haojie 20240 American High 20035 Harman/Kardon 20081, 20038 Amoisonic 20479 Harwood 20072 Anam 20162, Hewlett Packard 21972 Anam National 20162 HI-Q 20047 Asha 20240 Hitachi 20037, 20042, 20055 Audiovox 20037, 20278 Howard 21972 Beaumar
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 VCR 62 Motorola 20035, 20048 Scott 20184, 20045, 20121, MTC 20240 Sears 20035, 20037, 20042, 20104 20047, Multitech 20072 Sharp 20048, 20209 NEC 20035, 20037, 20048, 20104, 20067, 20038 Shintom 20072 Newave 20037 Shogun 20240 Nikko 20037 Singer 20072 Noblex 20240 Sonic Blue 20616 Sony 20035, 20032, 20636, 21972 20033, Northgate 21972 Olympus 20035 STS 20042 Optimus 21062, 20162, 20037, 20048, 20104, 20432 Sylvania 2003
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 DVD Player Aiwa Akai Allegro Apex Digital 20641, 21912 20770 Microsoft 20522 Mintek 20717 20869 20672, 20717, 20797, 21061, 20796, 21056, 21937, 20794, 21020, 21915 Mitsubishi 21521, 20521 Nesa 20717 21003 Blaupunkt 20717 Norcent Blue Parade 20571 Onkyo 20503, Broksonic 20695 Oritron 20651, 21980 20627, 21924, Changhong 20627, 21061 Panasonic 20490, 21762, 21990 CineVision 20869 Philips 20503, Coby 21086 Pioneer 20525, 20571 Cu
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Troubleshooting There is no picture or sound. ‧ Make sure the AC adapter is connected. ‧ Verify that there is a valid source signal. ‧ Make sure the correct input mode is selected. ‧ Make sure the master power switch has been turned on. There is no picture from AV. ‧ Make sure the BRIGHTNESS is properly adjusted. ‧ The florescent lamp may have reached the end of its life. Contact an authorized service center.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Picture is not clear. ‧ The source signal may be weak. ‧ The provider may be experiencing difficulties. ‧ Check input connections. Picture is light or improperly tinted. ‧ Check the Hue, Saturation and Color adjustments. ‧ Reset the TV to the factory default settings. The picture is too dark. ‧ Select a different APC mode. ‧ Check the PICTURE and BRIGHTNESS adjustments. ‧ The fluorescent lamp may have reached the end of its life.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 The picture moves. ‧ The source signal may be weak. ‧ The provider may be experiencing difficulties. ‧ Check input connections. The picture is doubled or tripled. ‧ The source signal may be weak. ‧ Check input connections. The picture is spotted. ‧ There may be interference from other appliances nearby or around the LCD TV. There are stripes on the screen or colors fade. ‧ There may be interference from other appliances.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 PC / DVI Timing Table H. Freq (KHZ) V. Freq (HZ) H. Polarity V. Polarity VGA 60HZ 640*480 31.469 - 59.941 - 2 MAC VGA 640*480 35.000 3 VGA 75HZ 640*480 4 US TEXT 720*400 31.469 5 STB 768*576 31.250 6 SVGA 60HZ 800*600 7 SVGA 75HZ 800*600 8 XGA 60HZ 1024*768 60.004 9 XGA 70HZ 1024*768 70.069 10 WSGA 1280*768 11 WSGA 1360*768 Mode No. Mode Name Resolution 1 66.667 37.5 75.0 70.087 50 37.879 60.317 46.875 75.0 48.363 56.476 47.
V37EMBB-UD3_HDMI+ATSC 2005/12/15 上午 10:26 Specifications ITEMS Panel TV Function Video PC Input Input 37.07” Aspect Ratio 16：9 Resolution Display Area (opening) HxV Pixel Pitch 820.8 mm x 461.7 mm Display colors 16,777,216 colors Video Output Audio Output Feature TFT-LCD Panel (CMO) 1920 x 1080 0.1425 mm x 0.4275 mm x 1000 : 1 Brightness (center) 600 cd / m2 (typ.) Viewing Angle (CR>10) Response Time (GTG) 176o Hor. / 176o Ver. 8 ms (typ.
Planar Systems, Inc. Customer Service Online Support：http://www.planar.com/support Email：PlanarSupport@planar.com Tel：1-866-PLANAR-1 (1-866-752-6271) Hours：M-F, 8am-8pm Eastern Time (5am-5pm Pacific Time) ©2006 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.
