User Manual

67
Planar UltraRes X Series User Manual
020-1396-01A
Page | 67
• Off: The display force all content to be displayed in SDR mode.
• Note: When viewing HDR content in this mode, the image quality will not have the
correct appearance.
• Note: Due to the performance requirements of HDR, simultaneous viewing HDR
and SDR content image appearance will be prioritized based on Zone 1 settings.
CEC Enable
• Enables HDMI-CEC (Consumer Electronics Control) with compatible external devices
• Options: On, Off: Default: Off
The CEC commands listed in the table below are implemented:
Command
Value
Image View On
0x04
Text View On
0x0D
Standby
0x36
Routing Change
0x80
Active Source
0x82
Give Physical Address
0x83
Report Physical Address
0x84
Request Active Source
0x85
Set Stream Path
0x86
Give Device Power Status
0x8F
Report Power Status
0x90
Inactive Source
0x9D
CEC Version
0x9E
Get CEC Version
0x9F
Give Features
0xA5
Report Features
0xA6
MEMC
• Enable motion estimation motion compensation (frame interpolation). This improves
smoothness for fast motion video content.
• Options: Off, Low, Medium, High; Default: Off
DisplayPort Type
• Set the version of DisplayPort that is used by the system
• Options: 1.1, 1.2; Default: 1.2
Keypad Lock
• Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.
• Options: Enable, Disable; Default: Disable