User Manual

41
Planar UltraRes X Series User Manual
020-1396-01A
Page | 41
Zone 4
• Select the source displayed in Zone 4
• Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS; Default: HDMI 4
• Note: If HDMI1 was selected as another source, OPS cannot be selected. If OPS was
selected as another source, HDMI1 cannot be selected.
Auto Scan Sources
• Select whether the display will automatically scan for a valid source on any input or zone
that does not have a source currently displayed. Scanning will begin on the currently
selected source, and move sequentially through the inputs in the order listed below –
stopping once a valid source is obtained.
• Options: HDMI 1, HDMI 2, HDMI 3, HDMI 4, DP, OPS
Advanced Layouts Submenu
This submenu defines the layouts for each multi-source view type.
Dual
• Select from two dual source layout options. The layout in orange will be the active layout
displayed when the Multi-Source View is set to Dual.
Triple
• Select from five triple source layout options. The layout in orange will be the active layout
displayed when the Multi-Source View is set to Triple.
PIP
• Select from four PiP (Picture-in-Picture) layouts. The layout in orange will be the active
layout displayed when the Multi-Source View is set to PiP.
PIP Size
• Select the size of the PiP (Picture-in-Picture) window.