user manual
Table Of Contents
- Operation Instructions
- Unpacking Instructions
- Safety Precautions
- Consignes de sécurité
- Package Overview
- First Setup
- Front View of the Product
- Rear View of the Product
- Quick Installation
- Basic Operation and Calibration/Reset Instructions
- Advanced Operation—OSD Menu
- Supporting Timing Modes
- Technical Information
- Wall-Mount Installation Instructions
- Troubleshooting
- Planar Support
Troubleshooting
No power
Make sure A/C power cord is securely connected to the power adapter and the power supply
is firmly connected to the
LED LCD Monitor
.
Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
Make sure all signal cables are installed.
Power on but no screen image
Make sure the video cable supplied with the
LED LCD Monitor
is tightly secured to the video
output port on back of the computer. If not, tightly secure it.
Adjust brightness.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the
LED LCD Monitor
to another computer.
18