user manual

- 72 - - 73 -
Model Name
PS5580
Back Light Unit Type LED
Active Display Area
(H X V)
1209.6 X 680.4mm
Aspect Ratio 16 : 9
Number of pixels 1920 (H) X 1080 (V)
Pixel Pitch 0.630 X 0.630 mm
Display Colors 1.07Billion
Luminance of White 400 cd / m
2
Contrast ratio
(Dark Room)
4,000 : 1
Bezel 7 / 6 / 6 / 6 (U/D/L/R) mm
Power Supply AC100V ~ 240V (50/60Hz)
Power
Consumption
Max 125W
Typical 120W
Stand-By
＜
1.0W
Surface Treatment Haze 0% / Hard coating 2H
Viewing Angle H : 178˚, V : 178˚
Response Time
(G to G)
8msec (TYP.)
Environmental
condition
Temperature
5
℃
~ 35
℃
Humidity 35% ~ 75%
Input Signal
Support Resolution
VGA, SVGA, XGA, SXGA, UXGA, WXGA,
480p,576p,720p(50/60),1080i(50/60),1080p(50/60)
HDCP
Compliant with High-bandwidth Digital Content Protection
(HDCP) using DVI and HDMI 1.3a standards
Frequency H : 31.5 ~ 75kHz, V : 50 , 60 Hz
In/Output
Terminal
Input DP x 1,HDMI x 2, DVI x 1, PC x 1, RS-232C x 1, LAN x1, IR x 1
Output DVI-D x 1, RS-232C x 1
Lamp Life Tme
Min 35.000Hrs (Ta : 25
±
2
℃
)
Dimension
(W X H X D)
1224.2 x 696.0 x 50.0mm
Weights 21Kg(
±
0.5Kg)
※
Product design and specification can be changed for quality improvement without prior notice.
8. Specification 9. Regulatory Information
Manufacturer's Name: Planar Systems, Inc.
Manufacturer's Address: 1195 NW Compton Drive
Beaverton, OR 97006
Declares that the products Model Numbers: PS5580
Conforms with the provisions of:
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN55022:2010 Radiated and Conducted Emissions from IT Equipment
EN55024:2010 Immunity of IT Equipment
Including: EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated Immunity
EN61000-4-4 Electrical Fast Transients
EN61000-4-5 Line Surge
EN61000-4-6 RF Conducted Susceptibility
EN61000-4-8 Magnetic Field Immunity
EN61000-4-11 Voltage Dips and Interrupts
And: EN61000-3-2 Harmonic Current Emissions
EN61000-3-3 Voltage fluctuations and Flicker
Council Directive 2006/95/EC on Low Voltage Equipment Safety:
EN60950:2006+A11+A1+A12 Safety of IT Equipment
The Technical Construction File required by this Directive is maintained at the corporate headquarters of Planar Systems,
Inc., 1195 NW Compton Drive, Beaverton, OR 97006.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Industry Canada (ICES-003): This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Any changes or modifications to the display not expressly approved by Planar could void the user's authority to operate this
equipment.
Other Certifications
CISPR 22