user manual

- 26 - - 27 -
3.6. Connection of Control Cable
•
Control signal transmission can be connected by 3 different methods.(RS-232C or Ethernet or IR)
•
RS-232C and Ethernet connection cannot be used simultaneously.
•
All control signals are output to the RS-232OUT after conversion to RS-232C signal.
3.6.1. Connection of RS-232C Cable & IR Receiver
•
Maximum use of RS-232C with Daisy Chain connection is 30 sets or less, if you need additional connection, use
RS-232C distributor.
3.6.2. Connection of Ethernet Cable
•
In case of Ethernet connection, the control PC should be connected to one of PS5580 sets with Ethernet cable.
For the connection between the PS5580 sets, they should be connected with RS-232C cables.
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
20˚ 20˚
RS-232C control PC
RS-232C
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
LAN IR RS232C IN RS232C OUT
Ethernet control PC
HUB or Router
(Wireless & Cable)
LAN Cable
(Direct Cable)
LAN Cable
(Direct Cable)
LAN Cable (Cross Cable)
IR Receiver
Max. Distance : 7M
IR Receiver
OFF
POWER
PICT. MUTE
SP.SEL
ZOOM
AUDIO
INPUT
PIP
A.SETUP
A.ADJ
1 32
4 65
7 98
GUIDE INFO 0
OK
INPUT CHANGEMODE
MENU
DP HDMI1 HDMI2 DVI
DVD
/HD
VIDEO1 VIDEO2 SVHS
MHL OPTION RGB
EXIT
VOL SEL
▲
▲
▲
▲
RS232
OSD.R
LAN