user manual

Adjusting Sharpness
m70L Installation & Configuration Guide 43
Adjusting Sharpness
After you set the Scale Mode to the one you will use for the program, select the
Sharpness level in the PICTURE menu to reduce scaling artifacts. If you are not scaling
your image, you may skip this section. (For instructions on how to set Scale Mode, see
"Scale Mode Settings" on page 39.)
Sharpness Settings
The Sharpness setting is in the PICTURE menu (press FREQ/PHASE
on the remote).
Sharpness settings determine how crisp the image should be. There are sixteen levels
of sharpness, where 0 is the softest and 15 is the sharpest. Seven is the default.
Picture
Source S-Video
Video Standard NTSC 60 Hz/3.58 MHz
Vertical Frequency (frame locked) 60Hz
Sharpness 4
Input Levels